Premium Fire Cement



  • Ready mixed
  • Easy-to use
  • Good Adhesion
  • Rated to 1250ºC

Vitcas Premium Fire Cement is finely ground putty-like material which is resistant to high temperatures. It sets rock-hard when exposed to heat or at room temperature, although the process takes longer the lower temperature. Premium Fire Cement will ensure both smoke and gas tight joints.

Where to use Vitcas Premium Fire Cement?

Premium Fire Cement should be used wherever smoke, heat or fumes, are escaping from solid fuel appliances, fireplaces, gas cookers, stove sand rangers, central heating systems and boilers. It can also be used to repair fire backs, for jointing internal flue pipes and on all structures subjected to gas and temperatures up to 1250ºC, well in excess of any domestic application.
Premium Fire Cement should not be used as a fireplaces screed or render nor for barbecues or other outside applications. Use Vitcas Heatproof Screed to provide a protective rendering, resistant to temperature 1300ºC.

How to use Vitcas Premium Fire Cement

Premium Fire Cement should be used straight from tub. For maximum adhesion, remove all dirt, dust and rust, and make sure area is thoroughly clean. Apply with a trowel, knife or hand and work well into the area. Fine joints can be made. As soon as possible, gently heat dry the repaired surfaces, gradually raising the heat to full operating temperature over 3-4 hours. Apply further cement to any fine cracks which may appear.

SIZES: 500g, 1 Kg, 2 Kg, 5 Kg.